User Tools
product:usb2ax:specs
This is an old revision of the document!
Table of Contents
USB2AX: Technical Specifications
The hardware of the USB2AX is relatively simple: only 17 components and a 16x20mm PCB.
At its core is an ATMega32u2, an USB-enabled 8bit MCU with 32KB of FLASH, 2.5KB of RAM and 1KB of EEPROM, running at 16MHz.
The USB2AX v3.1 has a double LED (Red/Green), ESD protection on both connectors (USB and serial), breakout pads for RST, GND, HWB and the 4 SPI pins (PB0 to PB3).
Schematics
The protection circuitry for TX and RX comes from the Ruggeduino, and makes it possible to withstand applying 12V to DATA indefinitely, which can easily happen in real life with a shoddy custom cable, or a damage cable.
Bill Of Material
Mechanical
Size: 16mm x 36mm x 7mm (without heat-shrink tubing)
product/usb2ax/specs.1364787363.txt.gz · Last modified: 2013/04/01 05:36 by xevel
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
