User Tools

Site Tools


product:usb2ax:specs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
product:usb2ax:specs [2013/04/01 05:42]
xevel
product:usb2ax:specs [2014/02/25 00:48]
xevel
Line 1: Line 1:
 ===== USB2AX: Technical Specifications ===== ===== USB2AX: Technical Specifications =====
  
-The hardware of the USB2AX is relatively simple: only 17 components and a 16x20mm ​PCB.+The hardware of the USB2AX is relatively simple: only 17 components and a 15x20mm ​PCB.
  
-At its core is an ATMega32u2, an USB-enabled 8bit MCU with 32KB of FLASH, 2.5KB of RAM and 1KB of EEPROM, running at 16MHz.+{{product:​usb2ax:​USB2AXv31_front_euro_s.jpg}}
  
-The USB2AX v3.1 has a double LED (Red/​Green),​ ESD protection on both connectors (USB and serial), breakout pads for RST, GND, HWB and the 4 SPI pins (PB0 to PB3).+At its core is an ATMega32u2, an USB-enabled 8bit MCU with 32KB of FLASH, 1KB of RAM and 1KB of EEPROM, running at 16MHz. 
 + 
 +The USB2AX v3.1 has a double LED (Red/​Green),​ ESD protection on both connectors (USB and serial), ​0.1" ​breakout pads for RST, GND, HWB and the 4 SPI pins (PB0 to PB3).
  
  
Line 15: Line 17:
 [[https://​paranoidstudio.assembla.com/​code/​paranoidstudio/​git/​nodes/​master/​usb2ax/​elec|All Eagle files]] [[https://​paranoidstudio.assembla.com/​code/​paranoidstudio/​git/​nodes/​master/​usb2ax/​elec|All Eagle files]]
  
-The protection circuitry for DATA, with the zener diode and PTC resistor, comes from the [[http://​ruggedcircuits.com/​html/​ruggeduino.html|Ruggeduino]],​ and makes it possible to withstand applying 12V to DATA indefinitely. This situation can easily happen in real life with a shoddy custom or damaged cable, and improper protection could result in a fried motherboard...+The protection circuitry for DATA, with the zener diode and PTC resistor, comes from the [[http://​ruggedcircuits.com/​html/​ruggeduino.html|Ruggeduino]],​ and makes it possible to withstand applying 12V to DATA indefinitely. More detailed explanation of how it works [[http://​forums.trossenrobotics.com/​showthread.php?​5675-USB2AX-v3.1&​p=53101#​post53101|here]]. This situation can easily happen in real life with a shoddy custom or damaged cable, and improper protection could result in a fried motherboard... ​
  
  
 ==== Bill Of Material ==== ==== Bill Of Material ====
  
-FIXME +^ #  ^ Ref. ^ Qty. ^ Description ​                                                ^ Part Value ^     ​Package ​   ^ 
- +| 1  | U1    | 1 | ATMega32u2 MCU                                                | ATMEGA32U2-MU | QFN-32 ​     | 
 +| 2  | Q1    | 1 | SMD 16MHz quartz ​                                             | 16MHz | CRYSTAL-SMD-3.2X2.5 |  
 +| 3  | USB1  | 1 | USB Type A Plug through hole                                  |          | USB-A-THT ​       |  
 +| 4  | DXL1  | 1 | Dynamixel Connector Right Angle                               | SPOX2.5-3WAY ​               | 
 +| 5  | C1    | 1 | USB decoupling capacitor ​                                     | 4.7µF ​   | C0603            |  
 +| 6  | C2,C3 | 2 | ATmega decoupling capacitors ​                                 | 0.1µF ​   | C0402            |  
 +| 7  | C4    | 1 | Capacitor for UCAP                                            | 1.0µF ​   | C0402            | 
 +| 8  | C5,C6 | 2 | Load capacitor for quartz ​                                    | 18pF     | C0402            |  
 +| 9  | R1    | 1 | USB line resistor array                                       | 22R      | 0402x2 ​          |  
 +| 10 | R3    | 2 | DATA line protection and current limiting resistor array for LEDs | 150R | 0402x2 ​          |  
 +| 11 | RPTC1 | 1 | PTC resistor for DATA overvoltage protection ​                 | 100R     | C0603            |  
 +| 12 | D1    | 1 | Zener diode for DATA overvoltage protection ​                  | 5.1V     | SOD-923 ​         |  
 +| 13 | LED1  | 1 | Double LED                                                    | Green/Red | C0603           |  
 +| 14 | U2    | 1 | ESD protection ​                                               | IP4282CZ6,​115 | XSON6         |  
 +| 15 |       | 1 | Heat-shrink tubing (diam:​12,​7mm)(length:​24mm+/​-1mm)(TRANSPARENT) |            |  |
  
 ==== Mechanical ==== ==== Mechanical ====
  
-Size: 16mm x 36mm x 7mm (without heat-shrink tubing)+Size: 16mm x 36mm x ~7mm (without heat-shrink tubing)
  
 [[http://​www.xevel.fr/​other/​usb2ax_v3.1.stl|3D CAD file (stl)]] [[http://​www.xevel.fr/​other/​usb2ax_v3.1.stl|3D CAD file (stl)]]
  
product/usb2ax/specs.txt · Last modified: 2017/07/27 08:04 by xevel